VERTICAL FLOAT SWITCHES

MODEL VFS - 120 PUMP DOWN SWITCH

This mechanically activated pump switch is designed for direct control of pumps in non-potable water and sewage applications. It works well in applications with limited space such as: small sump chambers, effluent applications, and laundry trays, as well as in large tanks.

Pump switch is not sensitive to turbulence.
It is available for pump down applications only.

MOUNTING THE SWITCH

Warning: Do not install switch in direct line of incoming liquid.
INTERCHANGABLE：The mounting Dimensions and Footprint size will interchange with Exsisting Vertically operated Switches that are sold in the market. Excellent replacement switch for Sump and Sewage Pumps
Determine desired activation level and pumping range Pumping range can be adjusted by moving the float stop up or down the rod.

 

PIGGY-BACK PLUG INSTALL

Electrical outlet must not be located in pump chamber.Electrical outlet voltage, piggy-back plug voltage, and pump voltage must match.

 

MODEL  NO Voltage Cord  Lengths
VFS-120-10 120Volts  50/60Hz 10ft.  Cord  Length
VFS-240-10 240Volts  50/60Hz 10ft.  Cord  Length
VFS-120-20 120Volts  50/60Hz 20ft.  Cord  Length
VFS-240-20 240Volts  50/60Hz 20ft.  Cord  Length
ELECTRICAL SHOCK HAZARD
Disconnect power before installing or servicing this product. A qualified service person must install and service this product according to applicable electrical and plumbing codes.

 EXPLOSION OR FIREHAZARD
Do not use this product with flammable liquids.
Do not install in hazardous locations as defined by National Electrical Code, ANS/NFPA70.
Failure to follow these precautions could result in serious injury or death. Replace product immediately if switch cable becomes damaged or severed. This product must be installed in accordance with National Electric Code. ANS/NFPA 70 so as to prevent moisture from entering or accumulating within boxes, conduit bodies, fittings, float housing, or cable.