Cutter Assembly |
- Hardened 440 SST (56-60 Rockwell) shredding ring and grinding impeller.
- 18,300 cuts / second ..... 1.0 million cuts / minute.
|
Impeller |
- Full mechanical seal (silicon / carbide) and secondary lip seal
|
Motor |
- Capacitor start/ run design for assured starting, strong torque and grinding under heavy load.
- Pressed stator for precise shaft / bearing alignment, long life.
- Internal capacitors and start switch, no external control box required.
- Internal overload protection
- Dual ball bearings (upper and lower)
|
Oil-filled provides: |
- Constant bearing lubrication.
- Maximum motor cooling, even temperature distribution
|
|
 |
|